5 Extra-Wide Glass Doors, Amtecs Brand Reach-in Display Freezer with Bohn Out-Door Remote Unit, 3 HP Copeland Compressor on (OEM) Refrigeration, can Display 30% more Frozen Food than competition and with long Term Warranty. To Customize Call (M-F 8am-5pm EST) 516-342-9322. Low Price Guaranteed.
• Exterior Size: 162 W x 38 D x 91H Inches.
• Insulation: 4-inch Blue XPS4 Extruded Hi Performance Closed cell, R32.4 EISA Compliant, the Federal law 2009.
• Exterior Interior Finish: Acrylic Coated Stucco Embossed Galvalume Steel.
• Floor: Top Skin Aluminum Std. Floor Panels Included.
• Accessories: Digital Thermometer, Light Switch, Handle, 2 Self-Closing Hinges LHH, RHH available. Door Closure on all Door, Electronic Defrost Timer and PRV also included.
• Reach in Glass door(s): A set of 5 Low Temp Extra-Wide Display Doors, Heated Perimeter Frame and Glass, 3 Pane 30”x73” w/ Silver/Black/Gold, Serrated or Glossy Finish (Choose Color & Finish), T-8 Electronic Lighting on either side of each Display Door & 5 Set Std. Shelves/ Display Door. DOE Compliant.
• Refrigeration: 3 HP Low Temp Out-door Remote Refrigeration, Bohn Condensing unit with Galvanized Steel Hood and Exterior Service Valves, MOH030X62CF (MO= Manufacturer’s Original Equipment) R404A, Hermetic 208-230/1/60, Mounted w/Copeland Compressor, Electronic Defrost Timer, Drier, Sight-Glass and One Evaporator unit(s) 9900 Btu with TXV, Solenoid Valve and Thermostat all come Mounted and pre-wired. Required To be installed by a certified Tech of your Choice.
• Std. Lead-Time: 15 Days.
• OPTIONS: (1) Ten year warranty on Panels and Doors Included. (2) Five year warranty on Compressor Included. (3) One Year Warranty on All parts Included. (4) Parts under Warranty provided by (OEM) Manufacturer/ Assigned Reps. (5) To Customize Call in. (6) Earlier shipping available, Call. (7) Lead-time Counted from Confirmation to Ship-out.
Note to installer: 1. Hard Copper Condensate Line to be ¾ inch provided and Installed with Tape-Heater by the installer. Insulate with self-sticking Foam tape, after tape-heater is Installed. 2. P-Trap is required and to be provided and installed by Installer, right at the bottom of the Return line Riser. Every bend in the Riser should have a P-Trap and Return line should be pitched towards Compressor, to ensure proper Return of refrigerant oil back to compressor.
