8 Glass Door Amtecs Brand Walk-in Display Freezer with Bohn Out-Door Remote Unit, 6 HP Copeland Scroll Compressor on (OEM) Refrigeration, Box with Std. Floor Panels and with long Term Warranty. To Customize Call (M-F 8am-5pm EST) 516-342-9322. Low Price Guaranteed.
• Exterior Size: 82D x 194W x 91H Inches.
• Insulation: 4-inch Blue XPS4, Extruded Hi Performance Core, R32.4, EISA Compliant, the US Federal law 2009.
• Exterior Interior Finish: Acrylic Coated Stucco Embossed Galvalume Steel.
• Floor: Std. Floor Panels with Aluminum Top Skin Included.
• Loading Door: One Std. 36x76 inch Self-Closing and Heated Door on any wall with Left or Right Hinges (choose).
• Door Accessories: Digital Thermometer, Light Switch, Locking Handle, 2 Hinges HD, Vapor proof Light, PRV, Doorframe Heater and Door Closure on Loading Door Included.
• Reach in Glass door(s): A set of 8 Low Temp Display Doors, Heated Perimeter Frame and Glass, 3 Pane 23”x73” w/ Silver/Black/Gold, Serrated or Glossy Finish (Choose Color & Finish), T-8 Electronic Lighting on either side of each Display Door & 5 Set 27" Deep Shelves/ Display Door. DOE Compliant.
• Refrigeration: 6 HP Low Temp Out-door Remote Refrigeration, Bohn Condensing unit with Galvanized Steel Hood and Exterior Service Valves, MOZ060L63CFT (MO= Manufacturer’s Original Equipment) R404a, Hermetic 208-230/3/60, Mounted w/ Copeland Scroll Compressor, Drier, Sight-Glass, Electronic Defrost Timer and Two Evaporator unit(s), LSF140BWMC6K with TXV, Solenoid Valve and Thermostat all come Mounted and pre-wired, Designed to Hold -10F. Required To be installed by a certified Tech of your Choice.
• Std. Lead-Time: 15 Days.
• OPTIONS: (1) Ten year warranty on Panels and Doors Included. (2) Five year warranty on Compressor Included. (3) One Year Warranty on All parts Included. (4) Parts under Warranty provided by (OEM) Manufacturer/ Assigned Reps. (5) To Customize Call in. (6) Earlier shipping available, Call. (7) Lead-time Counted from Confirmation to Ship-out.
Note to Installer: 1. Hard Copper Condensate Line to be ¾ inch provided and Installed with Tape-Heater by the installer. Insulate with self-sticking Foam tape, after tape-heater is Installed. 2. P-Trap is required and to be provided and installed by Installer, right at the bottom of the Return line Riser. Every bend in the Riser should have a P-Trap and Return line should be pitched towards Compressor, to ensure proper Return of refrigerant oil back to compressor.
