8x8 Out-door Walk-in Freezer with Bohn Out-door Remote Unit, 2 HP Copeland Compressor on (OEM) Refrigeration, Box with Floor Panels and long Term Warranty. To Customize Call (M-F 8am-5pm EST) 516-342-9322. Low Price Guaranteed.
• Exterior Size: 94D x 94W x 91H Inches.
• Insulation: 4-inch Blue XPS4 Extruded Hi Density Closed cell, R-Value 32.4, EISA Compliant, the Federal law 2009.
• Exterior Interior Finish: Acrylic Coated Stucco Embossed Galvalume Steel.
• Floor: Floor Panels Included, Can Handle 600 lbs per Sq. ft. Distributed weight.
• Loading Door: One Std. 36x76 inch Self-Closing, Door Centered on any wall with Left Hinges, Right Hinges available (Choose).
• Door Accessories: Thermometer, Light Switch, Locking Handle, 2 Hinges HD, Vapor proof Light, Doorframe Heater, PRV, Door Closure on Entry Door Included.
• Refrigeration: 2 HP Low Temp. Out-door Remote Refrigeration, Bohn Condensing unit with Galvanized Steel Hood and Exterior Service Valves, MOH019L62CFT (MO= Manufacturer’s Original Equipment) R404A, Hermetic 208-230/1/60, Mounted w/ Copeland Compressor, Drier, Sight-Glass, Fan control or Head pressure Control, Electronic Defrost Timer and One Evaporator unit(s), LSF75BWMC6K with Electric defrost Heater Coils, TXV, Solenoid Valve and Thermostat all come Mounted and pre-wired. Required To be installed by a certified Tech of your Choice.
• Out-Door-Box Gear: Single Piece Membrane Roof-Cap, W.P Switch and Door Hood Included.
• Std. Lead-Time: 5 Days.
• OPTIONS: (1) Ten year warranty on Panels and Door Included. (2) Five year warranty on Compressor Included. (3) One Year Warranty on All parts Included. (4) Warranty provided by (OEM) Manufacturer/ Assigned Reps. (5) To Customize Call in. (6) Next day shipping available, Call. (7) Lead-time Counted from Confirmation to Ship-out.
• Note to installer: 1. Hard Copper Condensate Line to be ¾ inch provided and Installed with Easy-Heat by the installer. Insulate with self-sticking Foam tape, after tape-heater is Installed. 2. P-Trap is required and to be provided and installed by Installer, right at the bottom of the Return line Riser. Every bend in the Riser should have a P-Trap and Return line should be pitched towards Compressor, to ensure proper Return of refrigerant oil back to compressor.
