8 Ft. Long Amtecs Brand Infiniti model Open Display Case with 1 additional Extra-wide Center telescoping mounted Shelf, Self Contained 1 HP Copeland Compressor on (OEM) Refrigeration with long Term Warranty. Condensing units for Out-Door Remote Installation, available. 4, 6, 8 and multiples to 98 Ft. available. To Customize/ Call (M-F 8am-5pm EST) 516-342-9322. Low Price Guaranteed.
• Exterior Size: 29.5 D x 98 L x 73H Inches.
• Insulation: PUHD Hi Density Closed Cell Core, EISA Compliant, the Federal law 2009.
• Exterior Interior Finish: HD Steel mill finish Galvanized Steel.
• Display Rack: 2 levels with the Center rack Telescoping Included.
• Bumper: Std. 1 inch Boston bumper Included.
• Accessories: Digital Thermometer, Display Light with Switch Included.
• Color: Exterior and Interior all white or Black Included.
• Refrigeration: 1 HP Medium Temp Self contained Refrigeration, Condensing unit with (MO= Manufacturer’s Original Equipment) R404a, Hermetic 208-230/1/60, Mounted w/Copeland Compressor, Drier, Sight-Glass and Bottom Mounted Evaporator unit(s) with TXV, Solenoid Valve and Thermostat all come Mounted and pre-wired. Come Ready to Plug-in.
• Electrical Requirement: 115/1/60 for lighting and fans. 208-230/1/60 for Compressor. 50 C/s Compressors available.
• Std. Lead-Time: 15 Days.
• Operating Case Temperature: 38-40 degree F. All Refrigerated Cases are designed to operate in an Environment of 75 degree F and 55% Relative Humidity.
• OPTIONS: (1) Ten year warranty on Case Included. (2) Five year warranty on Compressor Included. (3) One Year Warranty on All parts Included. (4) Parts under Warranty provided by (OEM) Manufacturer/ Assigned Reps. (5) To Customize Call in. (6) Earlier shipping available, Call. (7) Lead-time Counted from Confirmation to Ship-out. (8) If Floor drain is unavailable can use Condensate Eliminators available but Not Included.
• Note to Installer: 1. PVC Condensate Line to be 1 inch to be used if it requires at site to be provided and installed by the Installer. 2. For Remote Refrigeration a P-Trap is required and to be provided and installed by Installer, right at the bottom of the Return line riser. Every bend in the Riser should have a P-Trap and Return line should be pitched towards Compressor, to ensure proper Return of refrigerant oil back to compressor.
